Fuel Level Sensor Float Height
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
When float is moved to contact the float arm on the stopper, ensure that stopper positions "F" (height A) and "E" (height B) are within the standard value.
Standard value:
FLOAT POSITION CHART
| Float position | Float height [mm (in)] | |
|---|---|---|
| Main | Sub | |
| Stopper position "F" (height A) | 140.9 (5.5) | 14.2 ± 3.0 (0.5 ± 0.1) |
| Stopper position "E" (height B) | 39.1 (1.5) | 179.3 ± 3.0 (7.0 ± 0.1) |