Idle-Up Operation Check

Before inspection and adjustment, set vehicle in the following condition:

• Engine coolant temperature: 80 - 90 °C (176.0 - 194.0 °F)
• Lights, electric cooling fan and accessories: OFF
• Transmission: Neutral ("N" or "P" position)
• Steering wheel: Straightforward

1. Check whether or not the idle speed is the standard value.

   Refer to IDLE SPEED CHECK . <2.0L ENGINE Non-turbo>

   Refer to IDLE SPEED CHECK . <2.0L ENGINE Turbo>

   Refer to IDLE SPEED CHECK . <2.4L ENGINE>

   Standard value: 700 ± 100 r/min <Except 2.4L ENGINE> 

   Standard value: 650 ± 100 r/min <2.4L ENGINE> 

2. Turn on the air conditioning switch and the blower speed selection dial. Engine idling speed should be within the standard value:

   Standard value: 750 ± 50 r/min <2.0L ENGINE Non-turbo> 

   Standard value: 800 ± 50 r/min <2.0L ENGINE Turbo> 

   Standard value: 800 ± 50 r/min <2.4L ENGINE> 

   NOTE: It is not necessary to make an adjustment, because the idling speed is automatically adjusted by the ISC system. If, however, a deviation from the standard value occurs for some reason, check the ISC system (Refer to IDLE SPEED CHECK <2.0L ENGINE Non-turbo> or IDLE SPEED CHECK <2.0L ENGINE Turbo> or IDLE SPEED CHECK <2.4L ENGINE>)