General Specifications
WARNING: This page is about a different variant/trim than selected.
GENERAL SPECIFICATIONS
| Item | Specification | ||
|---|---|---|---|
| Rear axle | |||
| Wheel bearing | Bearing type | Unit ball bearing (double-row angular contact ball bearing) | |
| Driveshaft Joint | Type | Outer | EBJ |
| Inner | ETJ | ||
| Length (joint to joint) x diameter mm (in) | Left | 495 x 25 (19.5 x 1.0) | |
| Right | 581.5 x 25 (22.89 x 1.0) | ||
| Differential | |||
| Differential type | Mechanical type LSD | ||
| Reduction gear type | Hypoid gear | ||
| Reduction ratio | 3.307 | ||
| Number of teeth | Drive gear | 43 | |
| Drive pinion | 13 | ||
| Bearings (Outside diameter x Inside diameter) mm (in) | Side | 72 x 35 (2.8 x 1.4) | |
| Front | 62 x 25 (2.4 x 1.0) | ||
| Rear | 72 x 35 (2.8 x 1.4) | ||