LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Rear Axle -- Lancer RALLIART) >> Differential Carrier Assembly >> Assembly >> Assembly Service Points >> >>G<< Differential Side Bearing Inner Race Installation

>>G<< Differential Side Bearing Inner Race Installation

WARNING: This page is about a different variant/trim than selected.

Use special tool MB990728 to press-fit the differential side bearing inner races into the differential case.

Fig 1: Pressing-Fit Differential Side Bearing Inner Races Into Differential Case
G05904449Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals