General Specifications
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| ITEMS | SPECIFICATIONS | |
|---|---|---|
| Throttle body | Throttle bore mm (in.) | 60 (2.36) |
| Throttle position sensor | Hall element type | |
| Throttle actuator control motor | DC motor type, having brushes | |
| Engine control module (ECM) | Identification model No. | E6T72671 < M/T > E6T72672 < TC-SST > |
| Sensors | Mass airflow sensor | Heat sensitizing type |
| Barometric pressure sensor | Semi conductor type | |
| Intake air temperature sensor 1 | Thermistor type | |
| Intake air temperature sensor 2 | Thermistor type | |
| Engine coolant temperature sensor | Thermistor type | |
| Heated oxygen sensor | Zirconia type | |
| Accelerator pedal position sensor | Hall element type | |
| Camshaft position sensor | Magneto resistance element type | |
| Crankshaft position sensor | Magneto resistance element type | |
| Knock sensor | Piezoelectric type | |
| Power steering pressure switch | Contact switch type | |
| Manifold absolute pressure sensor | Semiconductor type | |
| Clutch pedal position switch < M/T > | Contact switch type | |
| Actuators | Multiport fuel injection (MFI) relay | Contact switch type |
| Fuel pump relay | Contact switch type | |
| Throttle actuator control motor relay | Contact switch type | |
| Injector type and number | Electromagnetic type, 4 | |
| Injector identification mark | JME600G | |
| Engine oil control valve | Duty cycle type solenoid valve | |
| Evaporative emission purge solenoid | Duty cycle type solenoid valve | |
| Turbocharger wastegate solenoid | Duty cycle type solenoid valve | |
| Fuel pressure regulator | Regulator pressure kPa (psi) | 329 (48) |