Audio Adapter Inspection

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Remove the audio adapter. (Refer to REMOVAL AND INSTALLATION )

Check the continuity between terminals of audio adapter and pin jack.

CONTINUITY CHART

The connecting position of pin jack side circuit tester	Terminal number	Measurement value
1	5	Continuity exists. (2 Ω or less)
2	4
3	5
4	6

Fig 1: Checking Continuity Between Terminals Of Audio Adapter & Pin Jack

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.