LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Heating, Air Conditioning And Ventilation - Lancer Evolution) >> On-Vehicle Service >> Power Relay Check >> Blower Relay Continuity Check

Blower Relay Continuity Check

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
VOLTAGE SPECIFICATION

Battery voltage Tester connection Specified condition
Not applied 3 -4 Open circuit
  • Connect terminal 1 to the positive battery terminal
  • Connect terminal 2 to the negative battery terminal
 3 -4 Less than 2 ohms
Fig 1: Blower Relay Connector Terminal Identification
G05386071Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals