LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Heating, Air Conditioning And Ventilation - Lancer Evolution) >> Compressor Assembly >> Disassembly And Assembly >> Assembly Service Points >> >>F<< Air Gap Adjustment

>>F<< Air Gap Adjustment

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Check whether or not the air gap of the clutch is within the standard value.

Standard value: 

0.25 - 0.45 mm (0.010 - 0.017 inch) 

NOTE: If there is a deviation of the air gap from the standard value, make the necessary adjustment by adjusting the number of shims.
Fig 1: Checking Air Gap
G07031266Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals