Twin Clutch SST Control Mode Switch Check

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Check the continuity between the connector terminals of twin clutch SST control mode switch.

TERMINAL CONTINUITY REFERENCE CHART

Terminal number	Switch position	Continuity
2 - 3	Operate to direction A, then hold.	Yes (2 Ω or less)
2 - 3	Other than above	Not present
1 - 3	Operate to direction B, then hold.	Yes (2 Ω or less)
1 - 3	Other than above	Not present

Fig 1: Checking Continuity Between Connector Terminals Of Twin Clutch SST Control Mode Switch

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

When other than above, replace the twin clutch SST control mode switch.