LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Twin Clutch-SPORTRONIC Shift Transmission (TC-SST) On-Vehicle Service - Lancer Evolution) >> Transaxle Case Oil Seal >> Removal And Installation >> Installation Service Points >> >>C<< Transaxle Case Oil Seal (LH) Installation

>>C<< Transaxle Case Oil Seal (LH) Installation

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the transaxle oil to the oil seal guide (special tool: MB992311). Insert the oil seal to oil seal guide (special tool: MB992311).
    Fig 1: Inserting Oil Seal To Oil Seal Guide Special Tool MB992311
    G06471506Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Use special tool oil seal installer (special tool: MB992310) to install the oil seal to the transaxle case.
    Fig 2: Installing Oil Seal To Transaxle Case Using Special Tool MB992310
    G06677302Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals