LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Twin Clutch-SPORTRONIC Shift Transmission (TC-SST) On-Vehicle Service - Lancer Evolution) >> Transaxle Assembly >> Removal And Installation >> Installation Service Points >> >>D<< Transmission Fluid Refilling

>>D<< Transmission Fluid Refilling

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refill 6.1 dm3 (6.4 qt) of the transmission fluid.
NOTE: The fluid capacity of the oil cooler assembly and the oil cooler hose is 0.6 dm3 (0.6 qt).
CAUTION:
  • If the transaxle assembly is repaired, fill new fluid and check the transmission fluid level. (Refer to TRANSMISSION FLUID LEVEL CHECK  .)
  • When the transaxle assembly is not repaired, the drained fluid can be reused if it is between the replacement intervals.