Paddle Shift Switch Check

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Check the continuity between the paddle shift switch connector terminals.

Standard value:

TERMINAL CONTINUITY REFERENCE CHART

Paddle shift lever	Terminal number	Resistance value
Upshift and hold the lever.	1 - 2	Continuity exists. (2 Ω or less)
Downshift and hold the lever.	2 - 3	Continuity exists. (2 Ω or less)
No operation	No continuity between the terminals

Fig 1: Paddle Shift Switch Connector End View

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

In the cases other than the above, replace the paddle shift assembly.