Audio Adapter Inspection

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Remove the audio adapter (Refer to REMOVAL AND INSTALLATION ).

Check the continuity between terminals of audio adapter and pin jack.

CONTINUITY CHART

The connecting position of pin jack side circuit tester	Terminal number	Measurement value
1	5	Continuity exists. (2 Ω or less)
2	4
3	5
4	6

Fig 1: Checking Audio Adaptor

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.