LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical <2.0L Turbo> - Lancer >> Valve Stem Seal >> Removal And Installation >> Installation Service Points >> >>D<< Valve Tappet Installation

>>D<< Valve Tappet Installation

  1. Apply a small amount of engine oil to the valve tappets.
    CAUTION:
    • Do not use pliers or other tools to install the valve tappets. Always install them by hand.
    • Be sure to install the valve tappets in the same position as before.
  2. Install the valve tappet to the cylinder head.
    Fig 1: Installing Valve Tappet To Cylinder Head
    G06671199Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals