LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical <2.0L Turbo> - Lancer >> Camshaft >> Removal And Installation >> Installation Service Points >> >>C<< Camshaft And Camshaft Sprocket Assembly (Intake Side) Installation

>>C<< Camshaft And Camshaft Sprocket Assembly (Intake Side) Installation

  1. Align the intake side paint mark of the timing chain which was put at removal with the paint mark of the intake side camshaft sprocket, and install the camshaft sprocket to the timing chain.
  2. Install the camshaft and camshaft sprocket assembly (intake side) to the cylinder head.
    Fig 1: Identifying Intake Side Paint Mark Of Camshaft Sprocket
    G06671178Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals