Service Specifications
WARNING: This page is about a different variant/trim than selected.
SERVICE SPECIFICATION
| ITEM | STANDARD VALUE |
|---|---|
| Brake reaction plate end play mm (in) | 0 - 0.16 (0 - 0.006) |
| Second brake end play mm (in) | 1.09 - 1.55 (0.043 - 0.061) |
| Low-reverse brake end play mm (in) | 1.65 - 2.11 (0.065 - 0.083) |
| Underdrive sun gear end play mm (in) | 0.25 - 0.45 (0.010 - 0.017) |
| Input shaft end play mm (in) | 0.70 - 1.45 (0.028 - 0.057) |
| Differential case preload mm (in) | 0.045 - 0.105 (0.0018 - 0.0041) |
| Underdrive clutch clearance mm (in) | 1.6 - 1.8 (0.063 - 0.070) |
| Reverse and overdrive clutch return spring retainer clearance mm (in) | 0 - 0.09 (0 - 0.003) |
| Reverse clutch clearance mm (in) | 1.6 - 1.8 (0.063 - 0.070) |
| Overdrive clutch clearance mm (in) | 1.5 - 1.7 (0.060 - 0.066) |
| Direct clutch clearance (in) | 0.6 - 0.8 (0.024 - 0.031) |
| Backlash between differential side gear and pinion mm (in) | 0.025 - 0.150 (0.0010 - 0.0059) |