Special Tools
WARNING: This page is about a different variant/trim than selected.
SPECIAL TOOLS SPECIFICATION
| TOOL | TOOL NUMBER AND NAME | SUPERSESSION | APPLICATION |
|---|---|---|---|
| MD998333 Oil pump remover |
MD998333-01 | Removal of oil pump | |
| MD999577 Spring compressor |
MD999577 | Removal and installation of one-way clutch inner race snap ring | |
| MD998924 Spring compressor retainer |
MD998924-01 | Use with spring compressor | |
| MD998412 Guide |
MD998412 | Installation of transfer drive gear and oil pump | |
| MB991632 Clearance dummy plate |
MB991632-01 | Measurement of reaction plate low-reverse brake and second brake end play | |
| MD998913 Dial gauge extension |
MD998913-01 | Measurement of low-reverse brake end play | |
| MB990938 Handle |
MB990938-01 |
|
|
| MB991633 Reduction brake set |
MB991633-01 | Adjustment of reduction brake piston | |
| MB990936 Installer adapter |
MB990936-01 or General service tool | Installation of differential taper roller bearing outer race | |
| MB991445 Bushing remover and installer base |
- | Installation of differential taper roller bearing outer race | |
| MD998334 Oil seal installer |
MD998334-01 | Installation of oil pump oil seal | |
| MD998907 Spring compressor |
MD998907-01 | Removal and installation of underdrive clutch snap ring | |
| MD998824 Installer adapter (50) |
MD998824-01 | Installation of direct clutch snap ring and transfer driven gear | |
| MB991629 Spring compressor |
MB991629-01 | Measurement of underdrive clutch and overdrive clutch end play | |
| MD999590 Spring compressor |
MIT305039 | Removal and installation of overdrive clutch snap ring | |
| MB991789 Spring compressor |
MB991789-01 | Measurement of reverse clutch end play | |
| MB991630 Spring compressor |
MB991630-01 | Measurement of underdrive clutch and overdrive clutch end play | |
| MD998834 Special spanner |
- | Removal and installation of direct planetary carrier lock nut | |
| MD998917 Bearing remover |
General service tool or MD998348-01 | Removal of transfer driven gear, output gear and parking gear | |
| MD998812 Installer cap |
General service tool | Use with installer and installer adapter | |
| MD998813 Installer 100 |
General service tool | Use with installer cap and installer adapter | |
| MD998801 Bearing remover |
General service tool or MD998348-01 | Removal of each bearing | |
| MD998820 Installer adapter (42) |
MD998820-01 | Installation of differential taper roller bearing | |
| MD998800 Oil seal installer |
General service tool | Installation of drive shaft oil seal |