LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Eclipse Spyder GS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transaxle Overhaul (F5A5A)) >> Direct Planetary Carrier >> Disassembly And Assembly >> Assembly Service Points >> >>B<< Taper Roller Bearing Installation

>>B<< Taper Roller Bearing Installation

WARNING: This page is about a different variant/trim than selected.
  1. Set the transfer driven gear as shown in the illustration.
  2. Using special tools MD998812, MD998813 and MD998824, press in the taper roller bearing.
Fig 1: Pressing In Taper Roller Bearing
G06245918Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals