LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Eclipse Spyder GS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transaxle Overhaul (F5A5A)) >> Direct Clutch >> Disassembly And Assembly >> Assembly Service Points >> >>B<< Snap Ring Installation

>>B<< Snap Ring Installation

WARNING: This page is about a different variant/trim than selected.
  1. Set special tools MB991630 and MD998924 as shown in the illustration.
  2. Using special tool to press down on the spring retainer, and then install the snap ring.
Fig 1: Identifying Snap Ring With Special Tools
G06245901Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals