Configuration Function
By operating the ETACS system or MMCS of scan tool MB991958, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
CONFIGURATION FUNCTION CHART
| Adjustment item (scan tool display) | Adjustment item | Adjustment contents (scan tool display) | Adjusting contents |
|---|---|---|---|
| Alarm | With/without theft-alarm function | Disable | Without function |
| Enable | With function (default) | ||
| Duration of pre-alarm | Adjustment of pre-alarm continue time | 10 sec | 10 seconds (default) |
| 6 sec | 6 seconds |