LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Chassis Electrical - 5 Of 5 >> Theft Alarm >> Inspection >> Theft-Alarm Indicator Check

Theft-Alarm Indicator Check

  1. Remove the center panel.
  2. Connect the battery (+) terminal with the center panel connector (terminal No. 15). Then, check if the theft-alarm indicator is illuminated when the battery (-) terminal and the center panel connector (terminal No. 12) are connected.
  3. If the theft-alarm indicator is illuminated, it is judged good.
    Fig 1: Identifying Theft-Alarm Indicator Connector Terminal
    G05433523Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals