Trouble Symptom Chart For Input Signal

TROUBLE SYMPTOM CHART

Trouble symptom	Inspection Procedure
ETACS-ECU does not receive any signal from the ignition switch (ACC).	INSPECTION PROCEDURE 1: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE IGNITION SWITCH (ACC).
ETACS-ECU does not receive any signal from the ignition switch (IG1).	INSPECTION PROCEDURE 2: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE IGNITION SWITCH (IG1).
ETACS-ECU does not receive any signal from the key reminder switch.	INSPECTION PROCEDURE 3: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE KEY REMINDER SWITCH.
ETACS-ECU does not receive any signal from the front door lock actuator.	INSPECTION PROCEDURE 4: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE FRONT DOOR LOCK ACTUATOR.
ETACS-ECU does not receive any signal from the front door switch (LH).	INSPECTION PROCEDURE 5: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE FRONT DOOR SWITCH (LH).
ETACS-ECU does not receive any signal from the front door switch (RH).	INSPECTION PROCEDURE 6: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE FRONT DOOR SWITCH (RH).
ETACS-ECU does not receive any signal from the rear door switch (LH).	INSPECTION PROCEDURE 7: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE REAR DOOR SWITCH (LH).
ETACS-ECU does not receive any signal from the rear door switch (RH).	INSPECTION PROCEDURE 8: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE REAR DOOR SWITCH (RH).
ETACS-ECU does not receive any signal from the liftgate switch.	INSPECTION PROCEDURE 9: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE LIFTGATE SWITCH.
ETACS-ECU does not receive any signal from the hood switch.	INSPECTION PROCEDURE 10: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE HOOD SWITCH.
ETACS-ECU does not receive any signal from the liftgate switch.	INSPECTION PROCEDURE 11: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE LIFTGATE SWITCH.
ETACS-ECU does not receive any signal from the hazard warning light switch.	INSPECTION PROCEDURE 12: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE HAZARD WARNING LIGHT SWITCH.
ETACS-ECU does not receive any signal from the column switch signal.	INSPECTION PROCEDURE 13: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE COLUMN SWITCH SIGNAL.