LEMON Manuals: Even more car manuals for everyone

Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Chassis Electrical - 5 Of 5 >> ETACS >> Troubleshooting >> Input Signal Procedures >> Inspection Procedure 7: ETACS-ECU does not receive any signal from the rear door switch (LH). >> Technical Description (Comment)

Technical Description (Comment)

If there is an error to the rear door switch (LH) input signal, the rear door switch (LH) signal is no longer output to the communication line.

scientia non olet · About LEMON Manuals