LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Chassis Electrical - 5 Of 5 >> ETACS >> Troubleshooting >> Input Signal Procedures >> Inspection Procedure 5: ETACS-ECU does not receive any signal from the front door switch (LH). >> Notes

Inspection Procedure 5: ETACS-ECU does not receive any signal from the front door switch (LH).: Notes

Fig 1: Front Door Switch (LH) Input Circuit Diagram
G05434828Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.