LEMON Manuals: Even more car manuals for everyone

Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Chassis Electrical - 5 Of 5 >> ETACS >> Troubleshooting >> Input Signal Procedures >> Inspection Procedure 12: ETACS-ECU does not receive any signal from the hazard warning light switch. >> Technical Description (Comment)

Technical Description (Comment)

If there is an error to the hazard warning light switch input signal, the hazard warning light switch signal is no longer output to the communication line.

scientia non olet · About LEMON Manuals