LEMON Manuals: Even more car manuals for everyone

Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Chassis Electrical - 5 Of 5 >> ETACS >> Troubleshooting >> Input Signal Procedures >> Inspection Procedure 11: ETACS-ECU does not receive any signal from the liftgate switch. >> Technical Description (Comment)

Technical Description (Comment)

If there is an error to the liftgate switch input signal, the liftgate switch signal is no longer output to the communication line.

scientia non olet · About LEMON Manuals