LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Chassis Electrical - 3 Of 5 >> MMCS >> Inspection >> Audio And Video Adapter Check

Audio And Video Adapter Check

  1. Remove the audio and video adapter (Refer to REMOVAL AND INSTALLATION  ).
  2. Check that continuity exists between the terminal and the pin jack of audio and video adapter.
    CONTINUITY SPECIFICATION

    The connecting position of pin jack side circuit tester Terminal number Measurement value
    1 2 Continuity exists. (2 Ω or less)
    1 2
    3 5
    4 4
    5 5
    6 6
    Fig 1: Checking Continuity Exists Between Terminal And Pin Jack Of Audio And Video Adapter
    G05397084Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals