LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Chassis Electrical - 3 Of 5 >> MMCS >> Diagnosis >> Symptom Procedures >> Inspection Procedure 7: GPS signal can not be received. >> Notes

Inspection Procedure 7: GPS signal can not be received.: Notes

CAUTION: Whenever the ECU is replaced, ensure that the power supply circuit and the grounding circuit are normal. (Check that the voltage is 10 V or more).