LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mitsubishi
>>
2008
>>
Outlander LS, FWD
>>
Repair and Diagnosis
>>
Electrical
>>
Motors, Switches, Relays
>>
Chassis Electrical - 3 Of 5
>>
MMCS
>>
Diagnosis
>>
Symptom Procedures
>>
Inspection Procedure 12: Check the CAN box unit power supply circuit.
>>
Troubleshooting Hints
Troubleshooting Hints
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
The CAN box unit may be defective