LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Chassis Electrical - 3 Of 5 >> MMCS >> Diagnosis >> Service Mode >> Vehicle Signal Check

Vehicle Signal Check

  1. Select "Vehicle Signal Check" on "Service" screen.
    Fig 1: Screen Display - Service
    G05385459Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. The check results will be displayed for the items below.
    • "Speed": "ON" when the vehicle speed is 6 km/h or more, and "OFF" when the vehicle speed is 4 km/h or less.
    • "ILL": "ON" when the lighting switch is on (headlight position), and "OFF" when they are off (except headlight position).
    • "Shift Position R": "ON" when the selector lever is at R position, and "OFF" when it is at the other position.
      Fig 2: Screen Display - Vehicle Signal Check
      G05396995Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.