LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Chassis Electrical - 3 Of 5 >> MMCS >> Diagnosis >> Service Mode >> Memory Initialization

Memory Initialization

  1. Select "Memory Initialization" on "Service" screen.
    Fig 1: Screen Display - Service
    G05385459Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. If you select "Start" on "Memory Initialization" screen, the settings such as registered locations and music server will be erased (initialized) from the memory.
    NOTE: If the ignition switch is turned to "LOCK" (OFF) position during the initialization, the initialization will be suspended. If the ignition switch is turned to "ACC" or "ON" position, the initialization will be resumed.
  3. After the memory initialization is complete, the navigation system will restart automatically.
    Fig 2: Screen Display - Memory Initialization
    G05385490Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 3: Screen Display - In Early Period Of Memory
    G05385491Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.