LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Chassis Electrical - 3 Of 5 >> MMCS >> Diagnosis >> Service Mode >> How To Initiate The Service Mode

How To Initiate The Service Mode

  1. With the navigation system active, press and hold both the "NAVI" and "SET" buttons for 3.5 seconds.
  2. The service mode will be initiated. Then "Service" screen will be displayed.
scientia non olet · About LEMON Manuals