LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Chassis Electrical - 1 Of 5 >> Combination Meter >> On-Vehicle Service >> Fuel Gauge Unit Check >> Fuel Level Sensor Float Height

Fuel Level Sensor Float Height

When float is moved to contact the float arm on the stopper, ensure that stopper positions "F" (height A) and "E" (height B) are within the standard value.

Standard value: 

FLOAT POSITION CHART

Float position Float height mm (in)
Stopper position "F" (height A) 201.6 (7.9)
Stopper position "E" (height B) 18.0 (0.7)
Fig 1: Identifying Stopper Points Clearance
G05434260Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.


When float is moved to contact the float arm on the stopper, ensure that stopper positions "F" (height A) and "E" (height B) are within the standard value.

Standard value: 

FLOAT POSITION CHART

Float position Float height mm (in)
Main Sub
Stopper position "F" (height A) 166.2 (6.5) 48.8 ± 3.0 (1.9 ± 0.1)
Stopper position "E" (height B) 38.8 (1.5) 238.0 ± 3.0 (9.3 ± 0.1)
Fig 1: Identifying Stopper Points Clearance
G05434262Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.