Inspection Procedure 1: Water Leak Through Door Window Glass: Diagnosis
WARNING: This page is about a different variant/trim than selected.
- STEP 1. Check the window glass runchannel.
Q: Is the window glass runchannel in good condition?
YES: Go to Step 2.
NO: Replace the runchannel, then go to Step 4.
- STEP 2. Check the door window glass installation.
Q: Is the door window glass installed correctly?
YES: Go to Step 3.
NO: Reinstall the door window glass. (Refer to DOOR GLASS AND REGULATOR ). Then go to Step 4.
- STEP 3. Check the clearance at the top of the door window glass.
Q: Is the clearance at the top of the door window glass correct?
YES: Go to Step 4.
NO: Adjust the door window glass. Refer to DOOR WINDOW GLASS ADJUSTMENT . Then go to Step 4.
- STEP 4. Retest the system.
Q: Is any water leaking?
YES: Return to Step 1.
NO: The procedure is complete.