LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Galant DE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Anti-Lock Braking System (Abs)) >> Hydraulic Unit >> Removal And Installation >> Installation Service Point >> >> A << Brake Tube Connection

>> A << Brake Tube Connection

WARNING: This page is about a different variant/trim than selected.

Connect the tubes to the hydraulic unit assembly as shown in the illustration.

  1. To the front brake (LH)
  2. To the rear brake (RH)
  3. To the rear brake (LH)
  4. To the front brake (RH)
  5. From the master cylinder (secondary)
  6. From the master cylinder (primary)
    Fig 1: Connecting Tubes To Hydraulic Unit Assembly
    G04255448Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals