TROUBLESHOOTING HINTS (The most likely causes for these DTCs are to set are:)
WARNING: This page is about a different variant/trim than selected.
Current trouble
- Damaged wiring harness or connector
- Malfunction of stop light switch
- Malfunction of parking brake switch
- Malfunction of the hydraulic unit (integrated with ABS-ECU)
- Malfunction of the combination meter (integrated with meter ECU)
Past trouble
- Carry out diagnosis with particular emphasis on connector(s) or wiring harness between the combination meter circuit (terminal 7) to the brake fluid level switch or parking brake switch. For diagnosis procedures, refer to "How to cope with past trouble" (Refer to HOW TO USE TROUBLESHOOTING/INSPECTION SERVICE POINTS ).