LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1999 >> Eclipse Spyder GS-T, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Component Tests >> Temperature Gauge >> Sensor Resistance Test

Sensor Resistance Test

  1. Remove Engine Coolant Temperature (ECT) sensor from engine. See appropriate COMPONENT LOCATIONS  table. Place sending unit in 158°F (70°C) water. Check sensor resistance using ohmmeter.
  2. ECT sensor resistance should be 90-117 ohms. If ECT sensor resistance is okay, go to GAUGE RESISTANCE TEST . Replace ECT sensor if resistance is not as specified.
scientia non olet · About LEMON Manuals