LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1999 >> Eclipse Spyder GS-T, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Component Tests >> Oil Pressure Gauge >> Circuit Test (Eclipse, Montero & 3000GT)

Circuit Test (Eclipse, Montero & 3000GT)

  1. Disconnect oil pressure gauge wiring connector from sending unit inside engine compartment. Connect a test light between harness connector terminal and ground. Turn ignition on, but DO NOT start engine.
  2. If test light comes on and gauge needle moves, go to GAUGE RESISTANCE TEST (ECLIPSE, MONTERO & 3000GT) . If test light does not come on and gauge needle does not move, repair wiring to sending unit.
scientia non olet · About LEMON Manuals