Removing and installing/replacing bumper antenna for Comfort Access

Preliminary work needed: 

• Remove REAR BUMPER TRIM .

Removal: 

Disconnect connector (1).

Release detent.

Pull bumper antenna (2) out of holder (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Connect the connector (1).

Join bumper antenna (2) in holder (3).

Installation note: 

Ensure bumper antenna (2) engages correctly on holder (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install REAR BUMPER PANEL .