Removing and installing/replacing battery of telematics platform, low (Cooper)

Preliminary work needed:

Removal:

Open and remove lid (1) on telematics platform, low (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug.

Take battery (1) out of telematics platform, low (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Connect connector.

Insert battery (1) in telematics platform, low (2) and connect connector.

NOTE: Make sure battery and connector are correctly fitted.

Courtesy of BMW OF NORTH AMERICA, INC.

Position and close lid (1) on telematics platform, low (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Make sure lid (1) is correctly fitted.

Required follow-up work: