Removing and installing (replacing) telematics platform, low (Cooper)

Preliminary work needed: 

• Remove GLOVE COMPARTMENT .

Removal: 

Release detents and pull telematics platform, low (1) out of holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect connector (1).

Remove telematics platform, low (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Connect connector (1) to telematics platform, low (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Slide telematics platform, low (1) into holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install GLOVE COMPARTMENT .