Installing the ignition coils

• Guide in and install the ignition coil (1)  in the direction of the arrow.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten screw (2)  on ignition coil (3)  .
  TIGHTENING TORQUES SPECIFICATIONS
  
  

  Ignition coil to cylinder head cover
  M6 screw	Tightening torque	8 Nm

• Connect and lock the connector (1)  .
• Make sure the connector (1)  engages audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install the connector (2)  in the arrow direction.
• Make sure that the lock (1)  snaps in audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to IF INSTALLED: PARTIALLY INSTALLING ENGINE VENTILATION LINE .
• Refer to INSTALLING ACOUSTIC COVER .