Installing the air duct for the radiator

• Install the air duct (2).
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Air duct to deformation element/cross connection
  M6x20 screw
  	Tightening torque	6Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert reinforcement strut (3).
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Air duct to deformation element/cross connection
  M6x20 screw
  	Tightening torque	6Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Bracing strut to top cross connection
  M8
  	Tightening torque	25Nm

Follow-up work 

• Refer to INSTALL THE SUPPORT FOR THE BUMPER COVER .
• Refer to INSTALL THE IMPACT ABSORBER .
• Refer to INSTALL BUMPER COVER, FRONT .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to ADJUSTING ENGINE COMPARTMENT LID CATCH .