Install the support for the bumper cover

• Feed in support (3) and install.
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Front reinforcement strut
  screw
  	Tightening torque	11.8Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Support to deformation element
  Nut M8
  	Tightening torque	28Nm

• If required, secure cable bracket on support (3).

Follow-up work 

• Refer to INSTALL THE IMPACT ABSORBER .
• Refer to INSTALL BUMPER COVER, FRONT .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .