Installing the seat frame
- Correctly position the rear seat backrest (5)
.
If necessary, feed in relative cables.
NOTE:
Perform the steps on the right and left side.
- Tighten the screws (4)
.TIGHTENING TORQUE SPECIFICATIONS
Seat frame to backrest frame Screw
Replace screw.tightening torque 38Nm
Follow-up work
- Refer to REMOVING THE SEAT COVER WITH CUSHION .
- Refer to INSTALLING THE THIGH SUPPORT ON THE FRONT SEAT .
- Refer to INSTALLING THE OUTER COVER ON THE FRONT SEAT .
- Refer to INSTALL THE LEVER FOR SEAT HEIGHT ADJUSTMENT .
- Refer to INSTALL THE STEERING LEVER FOR BACKREST ADJUSTMENT .
- Refer to INSTALL THE COVER FOR BACKREST ADJUSTMENT .
- Refer to INSTALL INNER COVER .
- Refer to INSTALL FRONT SEAT .
- Refer to INSTALLING THE FRONT STRAP FITTING .