Installing the seat cover
- Place the seat cover correctly on the cushion.
- Secure all marked trim wires with clamps.
- Replace the clamps (2).
Parts: Clamps
- Insert the clamp (2) with the special tool 0 492 668 (52 0 050).
- Clasp trim wire (3) of cushion (1) and trim wire (4) of seat cover with clamp (2) and bend clamp (2).
| 1 | Upholstery |
| 2 | Clamp |
| 3 | Trim wire in cushion |
| 4 | Trim wire in seat cover |
| 5 | Seat cover |
Follow-up work
- Refer to REMOVING THE SEAT COVER WITH CUSHION .
- Refer to INSTALLING THE THIGH SUPPORT ON THE FRONT SEAT .
- Refer to INSTALLING THE OUTER COVER ON THE FRONT SEAT .
- Refer to INSTALLING THE LEVER FOR SEAT HEIGHT ADJUSTMENT .
- Refer to INSTALLING THE STEERING LEVER FOR BACKREST ADJUSTMENT .
- Refer to INSTALLING THE COVER FOR BACKREST ADJUSTMENT .
- Refer to INSTALLING INNER COVER .
- Refer to INSTALLING FRONT SEAT .
- Refer to INSTALLING THE FRONT STRAP FITTING .