Installing the seat frame

• Correctly position the rear seat backrest (5).

  If necessary, feed in relative cables.

  NOTE: Perform the steps on the right and left side.
• Tighten the screws (4).

Courtesy of BMW OF NORTH AMERICA, INC.

• F56/57: 

Correctly attach cable linkage (1) in holders (2) and (3).

Follow-up work 

• Refer to REMOVING THE SEAT COVER WITH CUSHION .
• Refer to INSTALLING THE THIGH SUPPORT ON THE FRONT SEAT .
• Refer to INSTALLING THE OUTER COVER ON THE FRONT SEAT .
• Refer to INSTALLING THE LEVER FOR SEAT HEIGHT ADJUSTMENT .
• Refer to INSTALLING THE STEERING LEVER FOR BACKREST ADJUSTMENT .
• Refer to INSTALLING THE COVER FOR BACKREST ADJUSTMENT .
• Refer to INSTALLING INNER COVER .
• Refer to INSTALLING FRONT SEAT .
• Refer to INSTALLING THE FRONT STRAP FITTING .