65 12 315 Removing and installing (replacing) HU-H) (Cooper Convertible)

Attention! 

Risk of damage!

A hard disk is installed in the head unit.

Carry out mechanical work on the headunit and adjacent components with vehicle care.

Avoid subjecting the headunit to vibration/shocks.

Attention! 

Read and comply with NOTES on protection against electrostatic damage (ESD protection).

Preliminary work needed: 

• Disconnect BATTERY GROUND LEAD.
• Remove CONTROL PANEL for heating and air conditioning.
• Remove (replace) center left FRESH AIR GRILLE .
• Remove (replace) center right FRESH AIR GRILLE .

Removal: 

Unscrew the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and disconnect all connectors (1).

Feed out the headunit (2) towards the top.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Feed in the headunit (2) from top to bottom.

Connect and lock all the connectors (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Only for US version with satellite radio: 

Additional work is required when replacing the headunit!

• Refer to REPLACING SDARS  as of 09/2009.

Required follow-up work: 

• Install CONTROL PANEL for heating and air conditioning system.
• Install center left VENTILATION GRILLE .
• Install center right VENTILATION GRILLE .
• Connect BATTERY GROUND LEAD.

Replacement: 

Carry out PROGRAMMING/CODING .

On vehicles with a production date as from 07/2015, install the correct NAVIGATION MAP .

Importing the Service history: 

• 05 Maintenance and Pre-Delivery Check
• Service history