Special tools for wiring harness repairs (Cooper 4-door hatchback and 2-door hatchback, 2020-2023)
Special tools required:
- 61 0 300
- 61 0 400
- 61 1 100
- 61 4 320
- 61 0 200
- 61 0 210
- 61 0 220
- 61 0 230
- 61 0 240
WIRING HARNESS REPAIR CASE 4.0 .
Repair product range, vehicle electrical system:
Single parts for wiring harness repairs*
NOTE:
SI 2 04 07 341 .
- Refer to applicable BMW Service Information:
SI 2 04 07 341 .
Release and press-out tool:
- Special tool 61 0 300
- Special tool 61 0 400 (MINI N12/N14)
- Special tool 61 1 100 (combustion engine)
Handling:
- NOTES FOR OPENING CONTACTS AND LOCKS of different connector contact systems
Cutting to length and strip off insulation from cables:
Wire stripper MultiStrip10*
*SOURCING REFERENCE APPLICABLE BMW WORKSHOP EQUIPMENT CATALOG .
Handling:
Crimping stop parts (small contacts) and butt connectors:
- Special tool 61 4 320
- Tool without crimping head
- CRIMPING HEAD (STRIP OFF INSULATION AND CUTTING FIBER-OPTIC CABLES TO LENGTH) .
- CRIMPING HEAD (CRIMPING FIBER-OPTIC CABLE CONTACTS) .
- CRIMPING HEAD (CRIMPING MQS CONTACTS) .
- CRIMPING HEAD (CRIMPING MPQ CONTACTS) .
- Replacement blade (face-cutting fiber-optic cables)
- Replacement blade with tool (insulation stripping unit)
- Universal crimping head (SI 2 04 06 293 )
Crimping stop parts (large contacts) and butt connectors:
- Special tool 61 0 200 (crimping kit)
- Special tool 61 0 210 (matrix set SLK 8)
- Special tool 61 0 220 (matrix set SLK 2.8)
- Special tool 61 0 230 (matrix set MAK 8/DFK4)
- Special tool 61 0 240 (butt connector 4.0 - 6.0 mm2 )
Handling:
- Refer to applicable BMW Service Information: