Install the center spoiler on the rear bumper panel
NOTE:
TECHNICAL INFORMATION
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For additional information see: BODY GAP DIMENSIONS (COOPER 4-DOOR HATCHBACK, 2020-2023)
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For additional information see: BODY GAP DIMENSIONS (COOPER 4-DOOR HATCHBACK, 2020-2023)
Preliminary work
- Refer to REMOVING THE DIFFUSER .
- Refer to REMOVING THE LEFT AND RIGHT TAIL LIGHTS .
- Refer to REMOVING REAR BUMPER PANEL .
- Refer to REMOVING THE LEFT AND RIGHT FRONT FOG LIGHT .
- Release the center spoiler (1) at the detents (arrows) and remove.
- Attach center spoiler (1) lock into detents (arrows).
Follow-up work
- Refer to INSTALLING THE LEFT AND RIGHT FRONT FOG LIGHT .
- Refer to INSTALLING THE REAR BUMPER COVER .
- Refer to INSTALLING THE LEFT AND RIGHT TAIL LIGHTS .
- Refer to INSTALLING THE DIFFUSER .